Solo Ultra-Linear Diamond Edition
A headphone amplifier with an ideal balance of valvey smoothness with detailed clarity, and full frequency extension with "effortless" dynamics, makes the (solid state) Solo Ultra Linear Diamond ...
A headphone amplifier with an ideal balance of valvey smoothness with detailed clarity, and full frequency extension with "effortless" dynamics, makes the (solid state) Solo Ultra Linear Diamond Edition headphone amplifier a must-have companion for late night and personal headphone listening at home.
|Headphone impedance range||8 to 2,000 Ohms / 16 to 600 Ohms preferred|
|Power output (rms, both channels fully driven at 1% THD)||32 Ohms: 140mW/channel; 600 Ohms: 30mW/channel|
|Input sensitivity (for specified power output into 32 Ohms)||511mV rms|
|Input impedance||37k Ohms at max volume; 50k Ohms at min volume|
|Distortion (THD plus noise at 9 o'clock volume control setting (qtr power))||10Hz-20kHz: better than 0.04%; 10Hz-1kHz: better than 0.02%|
|Frequency response (±0,-3dB)||10Hz - 35kHz|
|Output noise (22Hz-22kHz, quasi-peak/un-weighted)||-95dB|
|Channel balance||better than 1dB|
|Crosstalk||Left to Right -56dB; Input to Input -68dB|
|Input selector centre-off position||non-shorting; -38dB at max volume with 2V rms input (ref: 1kHz and 10kHz)|
|Output Stage||Bipolar class AB|
|Supply voltage||24V DC unipolar|
|Size (approx.)||W: 107 x H: 50 x D: 185 (mm) inc. controls|
Ultra low noise headphone amp that suits IEMs
A two input headphone amp - two sources or "tape loop"
Headphone impedance-ranging volume control - no gain switches!
High-side output current - greater control for "difficult" headphones
"Always-on" for optimum sound quality
PSU1 linear power supply as standard