Reflex M phono stage
The Reflex M phono stage preamp focuses on the perspective feel of the sound stage - designed to place sounds more accurately front to back as well as laterally between and beyond the speakers - the ...
The Reflex M phono stage preamp focuses on the perspective feel of the sound stage - designed to place sounds more accurately front to back as well as laterally between and beyond the speakers - the "musical distance" behind your speakers should indicate a greater perspective than their away-from-wall positioning would suggest.
|Input and output connectors||RCA/phono sockets, hard gold plated|
|Input sensitivity range||1.5mV to 10mV|
|Output range (for above inputs)||168mV to 1120mV|
|Maximum input||46mV rms|
|Maximum output||5.2V rms|
|Gain||41dB (112) at 1kHz|
|Input impedance||47k Ohms plus 100pF|
|Output impedance (driving impedance)||1k Ohm (will drive 10k Ohms and above)|
|Noise at output||-68dB Quasi-peak 20Hz to 20kHz|
|RIAA accuracy||< 0.3dB|
|Frequency response||20Hz - 100kHz ("flat", corrected to RIAA)|
|Power supply||remotely powered using option of energy saving switched mode or PSU1 linear power supply|
|Size (approx.)||W: 107 x H: 50 x D: 180 (mm) inc. jacks|
It is strong on tonal correctness and low on tonal distortion, rendering each instrument and voice in its proper register, underpinned with a detailed tuneful bass.
As with all our products, the Reflex M phono stage preamp should be left powered-up for its circuits to fully stabilize, and give the intended performance.
Although we also produce a Reflex for low output moving coil cartridges, you can couple a Reflex M with our Elevator EXP - an electronic step-up "transformer" for moving coils - to not only keep your cartridge options open, but to take your moving coil listening experience to new heights.