We are using cookies to give you the best experience on our site. Cookies are files stored in your browser and are used by most websites to help personalise your web experience. By continuing to use our website without changing the settings, you are agreeing to our use of cookies.
We Love to Listen
Graham Slee Reflex C phono stage
Graham Slee Reflex C phono stage

Graham Slee

Reflex C phono stage

The Reflex C is a moving coil cartridge preamp. It provides you with great musicality and excitement for your moving coil listening, revealing many "secrets" hidden in your vinyl, plus great dynamics,...

Brand: Graham Slee
Product Types:    
Category:  

£695.00

Book a demo

Ticking here ensures we are not plagued by spam.

The Reflex C is a moving coil cartridge preamp. It provides you with great musicality and excitement for your moving coil listening, revealing many "secrets" hidden in your vinyl, plus great dynamics, delicacy and "just the right degree of warmth".

Input range 0.2mV to 1.0mV
Output (for input range) 252mV to 1,260mV (1.26V
Maximum input 3.9mV rms
Maximum output 4.914V rms
Gain 62dB (1,260) at 1kHz
Input impedance 100 Ohms
Output (driving/source) impedance 1k Ohm
Recommended load impedance 10k Ohm or greater
Noise at output -62dB CCIR Q-pk
Equivalent input noise (EIN) -124dB
Distortion 0.02%
RIAA accuracy < 0.5dB
Frequency response 20Hz - 200kHz (flat, corrected to RIAA)
Channel balance 0.2dB
Channel separation 64dB
Size (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks

Imagine a pure tube/valve solution for moving coil with no step-up transformer? Unfortunately because of tube/valve noise it can never happen. With the Reflex C phono stage you can get that illusive tube/valve linearity... from solid state!

Conventional solid state moving coil preamps often suffer poor open-loop bandwidth, and even though negative feedback widens their response, it also introduces phase modulation.

The Reflex C has more than ten times the open-loop bandwidth of a regular solid state moving coil preamp, reducing colorations from phase modulation considerably.

As with all our products, the Reflex C moving coil preamp should be left powered-up for its circuits to fully stabilize, and give the intended performance.