We are using cookies to give you the best experience on our site. Cookies are files stored in your browser and are used by most websites to help personalise your web experience. By continuing to use our website without changing the settings, you are agreeing to our use of cookies.
We Love to Listen
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK
Shunyata Denali D6000/T UK

Shunyata

DENALI D6000/T UK

The Denali’s tower form factor is uniquely vertically oriented with a narrow front profile allowing it to be placed alongside an audio rack without taking up valuable shelf space. The close ...

Brand: Shunyata
Product Type:  
Category:  

£5,950.00

Book a demo

Ticking here ensures we are not plagued by spam.

The Denali’s tower form factor is uniquely vertically oriented with a narrow front profile allowing it to be placed alongside an audio rack without taking up valuable shelf space. The close proximity to the audio equipment allows for shorter and tidier AC power cable routing.

MAXIMUM VOLTAGE
– Voltage input range: 220-250 V~
– Maximum input voltage: 250 V~
– Voltage output range: 220-250 V~ unregulated

CURRENT RATINGS
– Maximum continuous current (UK): 16 A
– Peak instantaneous current @ 10 ms: >1000 A
– Zone 1 output max: 7 A
– Zone 2 output max: 7 A
– Zone 3 (HC) output max: 16 A

TRANSIENT SUPPRESSION
– Maximum transient pulse 40,000 Amps @ 8/50 μs

NOISE REDUCTION TECHNOLOGY
– NIC™ Noise Isolation Chambers (patented)
– QR/BB™ Module (patents pending)
– Trident Transient Protection Module
– CCI™ v4 Noise Filters (3)
– KPIP™ Process


OVER-CURRENT PROTECTION
– Hydraulic electromagnetic breaker

WIRING SYSTEM
– 12 & 8 gauge ArNi® Conductors
– VTX conductor geometry
– OFE C10100 copper

NOISE SUPPRESSION
– ZONE 1 TO ZONE 2
  > 60db (500 kHz – 10 MHz)
  > 24db (100kHz – 30 MHz)
– INPUT TO ZONE1, ZONE 2
  > 24db (100 kHz – 30 MHz)
– INPUT TO ZONE3 (HC)
  > 15db (100 kHz – 30 MHz)

OUTLETS & CONNECTORS
– Input connector: IEC-C20
– Output sockets: 6x BS-1363 (3-pin)

VIBRATION CONTROL
– Vibration dampening panels (internal)
– AC outlet dampening gaskets
– Shunyata Isolation SSF-50 Footer

CONSTRUCTION
– Powder coated steel chassis – 16 gauge
– Anodized aluminum faceplate

DIMENSIONS
– Width: 7.75 inches (19.7 cm)
– Depth: 17.25 inches (43.8 cm)
– Height: 17.75 inches (45.0 cm)
– Weight: 24.1 lbs (11.0 kg)

The Denali’s tower form factor is uniquely vertically oriented with a narrow front profile allowing it to be placed alongside an audio rack without taking up valuable shelf space. The close proximity to the audio equipment allows for shorter and tidier AC power cable routing.

The Hydra Denali features patented technologies and proprietary components that are simply not available in other products. QR/BB™ technology, a non current-limiting electromagnetic breaker and massive internal wiring allow it to power entire systems including high-powered amplifiers while its proprietary CCI™ medical-grade filters reduce noise by an astounding –60db at 1 MHz.

The elegantly carved aluminum base, outriggers and precision machined 50mm stainless steel feet provide a platform for maximum stability and vibration control.

PERFORMANCE OPTIMIZATION

OUTLET ZONES

An AC zone consists of two outlet sockets. Each zone has a dedicated CCI™ filter that reduces noise from the connected equipment. For best performance with fewer than four components, connect each component to a separate zone. If there are more than four components, group the components by function. For example: Connect digital type components like a DAC and transport to a single duplex and the analog components like a preamp and phono preamp to a different duplex. Always plug power amplifiers into the HC (high-current) zone.

SETTLING TIME

The Denali is constructed using massive wiring and heavy duty contacts throughout. It was treated with Shunyata Research’s exclusive KPIP™ process. This significantly reduces the amount of time required for “burn-in”. Allow a few days settling time of continuous operation for best performance.

MOUNTING PLATFORMS

Ideally the Denali should be placed on a proper shelf, amp stand or solid platform. A heavy plank of hardwood or a granite slab also works well.

CONES AND FOOTERS

The Denali includes Shunyata Research’s SSF-50 isolation footer specifically designed to reduce vibration from the supporting platform. You may wish to experiment with other more expensive products.

AC WALL SOCKETS

It is strongly recommended that the wall outlet be replaced with a high-quality commercial grade unit. The standard wall outlet is usually not ideal for high-current applications. There are many audiophile grade outlets that are plated with a variety of metals including silver, gold, rhodium and others. These do not provide significant improvement over a quality commercial grade outlet.

OTHER POWER COMPONENTS

Using Shunyata Research power conditioners in conjunction with other power distributors, conditioners or regenerators is strongly discouraged. Connecting power conditioners in series usually gives unpredictable or poor results. Conditioners and regenerators can be highly reactive and may degrade the DTCD® and the CCI™ advantages built into the Denali. If extra outlets are needed, use the VENOM UK6 which was designed specifically to expand the outlet capacity of the Denali without performance compromises.

CONTACT ENHANCEMENT FLUIDS

Contact fluids, pastes and gels are NOT recommended for use with this device. Many of these types of products leave a residue that can contaminate or damage the contact metals over a period of time. The products labeled as silver-bearing grease or silver impregnated silicon are particularly harmful. Some of these are difficult or impossible to remove. Damage caused by these products will void your warranty! Never attempt to clean the contacts inside the outlets. If you wish to clean the external contacts, use CAIG DeoxIT® and DeoxIT® GOLD.

DTCD® DESIGNED (Dynamic Transient Current Delivery)

The Denali was designed using the DTCD® measurement analyzer. DTCD® Analysis is a technique that measures instantaneous current through low impedance electrical conductors and contacts. Shunyata Research uses it to optimize the design, specification and construction of parts and materials to ensure maximum current delivery performance.

CCI™ NOISE REDUCTION

Traditional power conditioners are designed to block noise coming in from outside the home but do not address the noise that is generated by the electronic component’s themselves. In fact, most conditioners reflect noise back into other components connected to the power conditioner. CCI™ (Component-to-Component Interference) is one of the most significant but often overlooked aspects to power system performance. The CCI™ filter consists of a proprietary multi-stage filter that reduces RFI and power supply generated interference.

QR/BB™ and NIC™ NOISE REDUCTION

The NIC™ (Noise Isolation Chamber) is a patented technology that reduces high frequency power line noise. NICs™ use a non-reactive ferroelectric substance that actually absorbs high frequency noise. This allows HYDRA power distributors to reduce noise without any of the negatives associated with conventional power conditioner designs. QR/BB™ is a patent-pending technology that improves system dynamics, especially when used with high powered amplifiers.

~ Patent US 8,658,892 ~

HYDRAULIC ELECTROMAGNETIC BREAKER

Common power conditioners use fuses or thermal breakers for over-current protection. Those devices cause voltage drops, increased contact impedance, thermal noise, excessive heat generation and current limiting effects when heavily loaded. The Denali uses a more advanced solution called a hydraulic electromagnetic breaker that can operate right up the to the maximum current level without the limitations of fuses or thermal breakers.

ArNi® CONDUCTORS

Shunyata Research has developed proprietary ArNi® conductors. They are created using the highest grade of certified copper available, OFE C10100 (Certified ASTM F68). ArNi® conductors are created in a “hollow tube” VTX™ geometry. Then, they are treated with the Kinetic Phase Inversion Process (KPIP™) for a period of 2 days.

SSF-50 SHUNYATA FOOTER

The SSF-50 is standard equipment on the Denali D6000/T. Shunyata Research tested dozens of the commonly available rubber feet and determined that none of them were adequate for use with Shunyata Research products. After researching multiple forms of energy dissipation methods, the SSF-50 was developed which provides the performance characteristics of an expensive after market footer without the exorbitant cost.

VIBRATION MANAGEMENT

The Denali chassis is constructed with heavy gauge steel and aluminum. Shunyata Research has developed vibration management strategies and vibration reduction panels that measurably reduce resonant vibration levels. All internal modules, filters and electronics are encapsulated in a vibration-absorbent compound.

Shunyata

Shunyata Research was founded by former military scientist Caelin Gabriel in 1997 with the goal of designing power-line and cable systems that would eliminate the deleterious effect noise has on high resolution sound and visual imaging systems. Guided by Gabriel’s use of measurement, innovative science and his many patents, Shunyata has grown to become one of the most professionally endorsed cable and power-product manufacturers in the audio/video industry. Shunyata’s factory is located across the Puget Sound from Seattle, in Poulsbo, Washington. Shunyata’s factory has 18,000 sq. feet of work space and offices to support 18 employees, most of whom have been with the company since its inception. Most Shunyata Research products are hand-assembled in Washington by a team of skilled product technicians, while all products are packaged, stored and shipped at Shunyata’s factory. Shunyata Research works with many of the world’s finest retailers in North and South America, Asia, Europe and the Middle East. Best known for using credible science and extreme parts customization to deliver products with the absolute highest performance and value, Shunyata Research has proven instrumental in advancing the state of high performance power conditioning and system cabling.