Comet Speaker Cable 3M Pair
You won’t have to wait 70 years to see this Comet. AudioQuest’s Comet Double Star-Quad speaker cable utilizes a carefully finessed amount of Solid Perfect-Surface Copper+ and Perfect-Surface ...
You won’t have to wait 70 years to see this Comet. AudioQuest’s Comet Double Star-Quad speaker cable utilizes a carefully finessed amount of Solid Perfect-Surface Copper+ and Perfect-Surface Silver Conductors. The addition of Silver is startling. Silver has a colorless sound, allowing the exposure of more textural nuances found in the recording.
- AudioQuest Comet Speaker Cable Pair (Factory Terminated)
- Metal: Solid 2x PSS / 6x PSC+
- Gauge: 12 AWG (3.31mm)
- Geometry: Double Star-Quad
- Dielectric: Foamed-Polyethylene (For All Postive Conductors)
- Noise Dissipation System: Carbon-Based Noise Dissipation and Cross-Talk-Disspation System
- 72V Dielectric-Bias System (DBS) saturates and polarizes insulation, greatly reducing digital-audio distortion
- Jacket: Black/Red Braid
- Plugs: 1000 Series Multi Spade or Banana (Silver Only)
- Factory Terminated
- Lifetime Warranty
Comet uses a carefully finessed combination of Perfect-Surface Copper+ and extremely high-purity Perfect-Surface Silver conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ and PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.
CARBON-BASED NOISE-DISSIPATION and CROSS-TALK DISSIPATION SYSTEMS (INSULATION):
The negative conductors in Comet are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Comet uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.
DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1):
All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.
DOUBLE STAR-QUAD GEOMETRY:
The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Comet allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.
SPREAD-SPECTRUM GEOMETRY (SST):
Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in Comet allow an exceptionally clear, clean and dynamic sound.
Comet is an exceptional Single-BiWire cable. When the halves are separated at the speaker end, the Double Star-Quad Geometry turns Comet into a true Double-BiWire set thanks to the magnetic autonomy of each Quad-conductor section. On its own, one Star-Quad conductor group would be a little lightweight in performance as it is biased towards treble finesse. The other Star-Quad conductor group is biased toward the bass; it’s more forceful and lacking ultimate resolution. Together they form a completely optimized full-range design. When separated, the Double Star-Quad design allows Comet to be a maximum-performance Double BiWire in a single cable.
AudioQuest offers a wide range of high-quality connectors that allow Comet to be securely attached to any type of equipment. Quality is in the low-distortion sound, not necessarily in the eye-candy effect. AQ ends are either dull looking gold or silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ PK-spade lugs are soft because better metal is soft, and facilitates a higher quality connection. For pieces requiring a banana plug or BFA connector the AQ PK-BFA/Banana provides unprecedented performance over conventional brass versions.
The metal breakouts on either end of Comet are marked “Speaker End” or “Amp End.” Please use cables in the direction required
The pioneering cable designer and manufacturer AudioQuest has been the largest cable supplier to the high-end specialist market for many years. Created in 1980 by Bill Low, AudioQuest is focused on the design and development of cables and is well known for the use of multiple connectors in their range of speaker cables. These high-end cables have been built using Bill’s understanding of the mechanisms that cause distortion in cable and have used technology to create superior sounding cables.
AudioQuest has always based its products on performance and sound quality and have taken the design and development of cables and turned it into an art form. Over the years the range of cables has evolved from audio only to data cables, video and digital cables. These cables have been built from the ground up based on the same low distortion principles as the original audio cables.
The results are truly superb with cables that are able to elevate a sound system by reducing distortion and providing a much clearer, harmonious and expressive tone. AudioQuest is sold in over sixty countries worldwide and is the cable of choice for professionals and enthusiasts alike.